Chrysler 300 2017 Owner'S Manual Download Page 160 | Manualshive

Page: 160 / 488

background image

the LaneSense system provides a visual warning through
the instrument cluster display to prompt the driver to
remain within the lane boundaries.

The driver may manually override the haptic warning by
applying torque into the steering wheel at any time.

When only a single lane marking is detected and the driver
unintentionally drifts across the lane marking (no turn
signal applied), the LaneSense system provides a visual
warning through the instrument cluster display to prompt
the driver to remain within the lane. When only a single
lane marking is detected, a haptic (torque) warning will not
be provided.

NOTE:

When operating conditions have been met, the

LaneSense system will monitor if the driver’s hands are on
the steering wheel and provides an audible warning to the
driver when the driver’s hands are not detected on the
steering wheel. The system will cancel if the driver does
not return their hands to the wheel.

Turning LaneSense On Or Off

The default status of LaneSense is off.

The LaneSense button is located on the center stack below
the Uconnect display.

To turn the LaneSense system on, push the La-
neSense button (LED turns off). A “Lane Sense On”

message is shown in the instrument cluster display.

To turn the LaneSense system off, push the LaneSense
button once (LED turns on).

NOTE:

The LaneSense system will retain the last system

state, on or off, from the last ignition cycle when the
ignition is changed to the ON/RUN position.

LaneSense Warning Message

The LaneSense system will indicate the current lane drift
condition through the instrument cluster display.

158

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
158
159
160
161
162
...
»

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2017

Brand: DANA Pages: 42

Brand: dallara Pages: 37

Brand: Yakima Pages: 8

Brand: EAL Pages: 4

Brand: Carax Pages: 2

Brand: Pacbrake Pages: 14

Brand: FormFit Pages: 4

Brand: Axxess Pages: 8

Brand: muth Pages: 10

Brand: Toro Pages: 24

Brand: Porsche Pages: 313

Truck Training Model

Brand: WABCO Pages: 56

Brand: EUFAB Pages: 16

Brand: Omix-Ada Pages: 6

Brand: GAC MOTOR Pages: 356

Brand: Radical Sportscars Pages: 44

Brand: KEKO Pages: 3

Brand: Movon Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands