Chrysler 300 2017 Owner'S Manual Download Page 68

Page: 68 / 488

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s

weight of the child restraint) for using the

LATCH anchorage system to attach the child

restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until the

combined weight of the child and the child

restraint is 65 lbs (29.5 kg). Use the seat belt

and tether anchor instead of the LATCH sys-

tem once the combined weight is more than

65 lbs (29.5 kg).

Can the LATCH anchorages and the seat belt

be used together to attach a rear-facing or

forward-facing child restraint?

Do not use the seat belt when you use the

LATCH anchorage system to attach a rear-

facing or forward-facing child restraint.

Can two child restraints be attached using a

common lower LATCH anchorage?

Never “share” a LATCH anchorage with two

or more child restraints. If the center position

does not have dedicated LATCH lower an-
chorages, use the seat belt to install a child

seat in the center position next to a child seat

using the LATCH anchorages in an outboard

position.

Can the rear-facing child restraint touch the

back of the front passenger seat?

Yes

The child seat may touch the back of the

front passenger seat if the child restraint

manufacturer also allows contact. See your

child restraint owner’s manual for more in-

formation.

Can the head restraints be removed?

Yes

Center position only may be removed.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 300 2017









































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands

Chrysler 300 2017, Owner'S Manual

Search results

Summary of Contents for 300 2017

Reviews:

Related manuals for 300 2017

Brands by name

Popular brands