9-2
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
9.3
Modify Projector Communication Settings
You need Administrator or Service permissions to complete this procedure.
1. Tap
Menu
>
Administrator Setup
>
Communications Configuration
.
2. Complete these fields:
9.4
Add a Network Device
You need Administrator or Service permissions to complete this procedure.
1. Tap
Menu
>
Administrator Setup
>
Network Devices Setup
.
2. Tap the check box. If the check box is not selected, the device does not appear in the
Network Devices
menu.
3. Tap the
Launch Dialog
icon in the
Device Name
field and enter a name for the network device.
4. Tap
Enter
.
5. Tap the
Launch Dialog
icon in the
URL
field and enter the URL for the network device.
6. Tap
Enter
.
9.5
Access a Network Device
Tap
Menu
>
Network Devices
>
Christie ACT
To interact with the device tap
in the top right corner of the window.
Field
Description
Device Name
The name of the projector.
IP Address
The IP address of the projector.
Subnet Mask
The subnet mask to which the address belongs.
Gateway
The IP address for the network gateway.
Apply
Applies Ethernet settings.
Serial Speed (Baud)
The baud rate of the serial port. The default is 115200.
Enable SNMP
Enables SNMP.
SNMP V2 / SNMP V3
The SNMP protocol type. Contact Christie for the SNMP V3 user ID and password.
Management IP
The IP address where SNMP information and notifications are sent.
Download MIB to USB
Sends the SNMP Management Information Base (MIB) file to a USB flash drive.
Apply
Applies SNMP settings.
Serial Access
Grants access to serial connections.
Ethernet Access
Grants access to Ethernet connections.
Summary of Contents for Solaria One
