Christie Solaria One, User Manual

Page: 22 / 136

1-8 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
1.8 Install the Lens
The lens seals the projection head, preventing contaminants from entering the main electronics area. Do not
operate the projector without a lens installed. Install a lens plug when you install or transport the projector.
1. Remove the lens surround.
2. Turn the lens clamp to the open position with a hex key. A hex key is attached to the lamp door.
3. Position the lens so the lens retaining ring mounts align with the lens mount.
4. Remove the lens caps from the front and rear of the lens.
NOTE:
Lens caps must be removed or they can melt and damage the lens.
5. Insert the lens straight into the lens mount opening without turning. Magnets inside the lens mount help
position the lens.