Christie Solaria One, User Manual

Page: 111 / 136

Solaria One User Manual 14-7
020-100841-02 Rev. 1 (11-2012)
1. Put your 3D glasses on upside down so the left lens is over your right eye and the right lens is over your
right eye.
2. If the image appears correct:
a. Tap Menu > Channel Setup on the projector touch pad controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted or True in the 3D Sync Polarity list.
Image Breakup
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Lower the Dark Time field value to match the values of your 3D system.
Image is Too Dark
The lamp power for 3D content is typically twice as high as for 2D content except when you are using a RealD
XL device.
1. Tap
Menu > Advanced Setup > Lamp Power / LiteLOC™ Setup.
2. Increase the value in the Power % field.
No 3D Effect
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Verify Enable 3D is selected.
Ghosting / Cross-talk
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Raise or lower the Dark Time field value.
5. Raise or lower the Output Delay field value to match the values of your 3D system.
Motion Artifacts
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Select Left (L1R1 L2R2) in the L/R Display Sequence list.