Christie Solaria One, User Manual

Page: 49 / 136

Section 3: Access the Projector and Run Diagnostics
Solaria One User Manual 3-5
020-100841-02 Rev. 1 (11-2012)
3.8 Respond to Alarms
When an alarm occurs, an Alarms window with a red border appears with a description of the alarm condition,
state, and time and date of the alarm. The window only displays alarms you have not previously
acknowledged. To acknowledge an alarm and remove it from the Alarms window, click
Acknowledge . To
view all alarms, tap Menu > Status > All Alarms in the left pane.
3.9 Turn the Projector Off
1. On the Touch Panel Controller (TPC), tap and hold the light bulb icon to turn the lamp off.
2. On the TPC, tap and hold the red power icon. The projector enters a cool down mode and the fans
and electronics stay on for 10 minutes. After this cool down period, the projector enters standby mode.
3. If you are servicing the projector, or removing the protective cover, disconnect AC and turn the breaker
OFF.