Christie Solaria One, User Manual

Page: 26 / 136

1-12 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
11. Close the fire wall door and tighten the 2 thumbscrews.
12. Close and lock the rear access door.
NOTE:
Ensure the hex key is placed back into its holder before
closing the rear access door.
1.10 Connect Devices to the Projector
To display content, you must connect a device that is capable of storing or playing content to the projector.
1.10.1 Projector Connections
Feature Description
1 LEDs indicating the status of projector components:
SOFTST - (Software State) Indicates the state of the software application running on
the ICP. During normal operation, this LED blinks. During start up, the LED changes
from off to blinking.
OSST - (Operating System State) Indicates the state of the ICP operating system.
During normal operation, the LED is green. During start up, the LED changes from
off to green.
FMTST - (FMT FPGA State) Indicates the state of the FMT FPGA. During normal
operation, the LED is green. When the power is turned on, the LED turns green
immediately.
ICPST - (ICP FPGA State) Indicates the configured state of the ICP FPGA. During
normal operation, the LED is green. When the power is turned on, the LED turns
green immediately.
IMB Power
FPGA Load
SM Run
FIPS
OS Load
SMS Run
Alarm
2
1
eSATA A eSATA B
USB/eSATA
DAS Ingest
IMB
Reset
GEN Lock Sync Out LTC Out
AES3
NAS
SOFTST OSST FMTST
Main Power
TPC Disconnect
PIBS1 Health
ICP Health
IMB Health
Marriage Emergency
Start
System
Reset
3D Sync
Ethernet
RS 232 PIBS1
HDMI A / LEFT HDMI B / RIGHT
1
2
3
4 5 6
7 8 9 10
11
12
13 14
15
16
17
17 18