Christie Solaria One, User Manual

Page: 32 / 136

1-18 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
1.16 Add the Lamp Information to the Lamp History
1. If the lamp is on, tap the lamp off ( ) icon to turn it off.
2. Tap Menu > Advanced Setup > Lamp Change Wizard .
3. Tap Next .
4. Complete these fields:
5. Tap Save .
6. Tap Next .
1.17 Turn the Lamp On
On the projector touch panel controller (TPC) tap the lamp on( ) icon.
1.18 Align the Lamp
1. Tap Menu > Advanced Setup > Lamp Power .
2. Verify the value in the Power% field is at a level suitable for your requirements.
3. Tap Menu > Advanced Setup > Light Adjust .
4. Record the number in the Intensity field.
5. Tap D isplay Full Screen White Test Pattern .
6. Complete a coarse lamp adjustment:
Apply Applies Ethernet settings.
Serial Speed (Baud) The baud rate of the serial port. The default is 115200.
Enable SNMP Enables SNMP.
SNMP V2 / SNMP V3 The SNMP protocol type. Contact Christie for the SNMP V3 user ID and password.
Management IP The IP address where SNMP information and notifications are sent.
Download MIB to USB
Sends the SNMP Management Information Base (MIB) file to a USB flash drive.
Apply Applies SNMP settings.
Serial Access
Grants access to serial connections.
Ethernet Access
Grants access to Ethernet connections.
Field Description
Type The lamp type.
Serial Number The lamp serial number.
Reason for Change The reason the lamp was changed.
Lamp Expiry (Hours) The number of hours the lamp can operate before replacement. This field
is auto-populated.
Hours Used The number of hours the lamp has operated before installation.
Field Description