Christie Solaria One, User Manual

Page: 36 / 136

1-22 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
9. If the test pattern is focused and centered on the screen you do not need to complete further image
adjustment. If the image is not focused and centered on the screen, complete one of these procedures:
a. See
Correct Keystone Effect on page 2-1 if the image appears distorted and resembles a trapezoid.
b. See Correct Vignetting on page 2-3 or Align the Lamp on page 1-18 if the image is brighter at the cen-
ter than it is at the sides.
c. See Fold Mirror Adjustment on page 2-6 if a corner or edge of an image is missing.
d. See Adjust Vertical Boresight Angle on page 2-3 if the image cannot be focused uniformly on the
screen with a focus adjustment.
e. See Adjust Horizontal Boresight on page 2-4 if a large horizontal angular offset to the screen is
required.
1.21 Load a RealD 3D EQ Configuration File
You need to install the RealD 3D EQ Configuration File if you are using RealD technology to display 3D
content. If you are not using a RealD technology to display 3D content, do not complete this procedure.
1. Insert a USB flash drive with the RealD 3D EQ configuration file into the USB port on the side of the
touch panel controller (TPC).
2. Tap Menu > Christie IMB > System .
3. Tap General > Config Files .
4. Tap Load Config File in the RealD 3D EQ area.
5. Select the configuration file.
6. Tap
Accept .
1.22 Play Content
After installing and configuring the projector, these are the tasks that you typically complete to play content:
a. Ingest the content. Content is typically provided on a hard drive sent by your movie distributor. To
ingest content, see Ingest Content on page 13-4 .
b. Ingest the Key Delivery Message (KDM) key. A KDM key is not required for trailers and other
unencrypted content. The KDM key is typically sent separately from the encrypted content on a USB
flash drive. See
Ingest Content on page 13-4 .
c. Verify the content plays correctly and the KDM is correct. See Content Window Icons on page 13-2 .
d. Create a play list. A play list is a list of content files including trailers, features, and automated events
that play in an order that you define. See Play Lists on page 13-5 .
e. Verify the play list plays correctly. See Content Management on page 13-1 .
f. Optionally schedule playback or add automation to a play list:
•To learn more about scheduled playback, see Schedule Views on page 13-9 .
•To add automation, see Manage Automation on page 13-19 .