Chicco 06620, Instructions For Use Manual

Page: 41 / 220

40 41
Interference In rare cases, even if DECT
digital technology ensures high
immunity to interference
from analogue devices,
interference can be caused
by the presence of another
intercom or similar transmission
device switched on nearby.
Electromagnetic pollution
(proximity to antennas with
radio transmitters, high
voltage cables, etc.).
Move away from analogue equipment and/or leave
the area in which it is located.
Reduction of the
operating area
- Presence of obstacles, metal
structures, reinforced concrete
walls, etc. interposed between
the baby unit (transmitter) and
the parent unit (receiver)
-Baby unit Alkaline batteries
and/or
parent unit rechargeable
lithium-ion battery almost flat.
- Move units closer together or relocate the
units themselves in order to reduce the number
of obstacles,
metal structures, reinforced concrete walls, etc.
interposed
between them
- Replace in the baby unit Alkaline batteries and/or
charge lithium-ion battery in the parent unit
Electrostatic or
electromagnetic
noise
Electro-static or electro-
magnetic interference due to
electrostatic or electromagnetic
fields emitted by other electrical
equipment: e.g. domestic
appliances, cellular or cordless
phones, etc.
Identify and, if possible, eliminate the cause of
interference.
Presence of hissing
or whistling
- Units are too close together
- Parent unit (receiver) volume
too high.
- More units further apart
- Reduce parent unit (receiver) volume, pressing
the volume adjustment button (6).
The parent unit
(receiver)
emits a weak
sound
- The child is too far away from
the baby unit (transmitter).
- Volume level too low on the
parent unit.
- Move the baby unit (transmitter) within 1-1.5m
away from the child.
- Increase the volume level on the parent unit
pressing
the + volume adjustment button (6).
The baby unit does
not switch on in
music mode
-the baby unit is on in Baby
Monitor mode.
- the MP3 player connected to
the baby unit is off or set to
minimum volume.
- Check if the power and link indicator light (12)
is on. If it is on, the product is working in Baby
Monitor mode.
Switch off Baby Monitor mode and switch on
Music mode.
-Verify MP3 player conditions and, if necessary,
switch it on and increase volume.
Temperature is
not shown on
the parent unit
display.
- The parent unit is on in
Reminder mode.
-absence of or loss of link with
baby unit.
- Check if the parent unit power and link indicator
light (12) is on. If this is off, the product is working
in Reminder mode. Switch on the product in Baby
Monitor mode.
-Move the parent unit closer to the baby unit to
establish a connection.
DECLARATION OF CONFORMITY:
Mod. 06620
Artsana S.p.A. hereby declares that this product is in conformity with the essential requirements and the
related dispositions established by directive 1999/5/CE. A copy of Declaration of Conformity with European
Directive 1999/5/EC is available at: www.chicco.com - Products Section
According to European Commission decision N ° 2000/299/EC of 06/04/2000, the frequency band used by
this product is harmonised in all EU countries; therefore, this is a class 1 product and can be freely used in all
countries of the European Community.
This product complies with EU Directive 2002/96/EC.
The crossed bin symbol on the appliance indicates that the product, at the end of its life, must
be disposed of separately from domestic waste, either by taking it to a separate waste disposal
site for electric and electronic appliances or by returning it to your dealer when you buy
another similar appliance. The user is responsible for taking the appliance to a special waste
disposal site at the end of its life. If the disused appliance is collected correctly as separate waste, it can be
recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment and
health, and contributes towards the recycling of the product’s materials. For further information regarding
the waste disposal services available, contact your local waste disposal agency or the shop where you
bought the appliance.
CONFORMITY WITH EU DIRECTIVE 2006/66/EC
The crossed-out wheeled bin symbol on the battery or its packaging, means that the batteries,
at the end of their life, should be disposed of separately from the municipal waste stream
via designated collection facilities appointed by the government or the local authorities, or
otherwise returned to the dealer when purchasing new equivalent rechargeable or
non-rechargeable batteries. Chemical symbols (Hg for mercury, Cd for cadmium, Pb for lead) printed
beneath the crossed-out wheeled bin symbol indicate the type of substance contained in the battery. The
user is responsible for bringing batteries, at the end of their life, to the appropriate collection facilities in
order to facilitate treatment and recycling. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human health and favour the recycling of
the materials of which the product is made. Illegal disposal of the product by the user will damage the
environment and human health. For more detailed information regarding the available waste collection
systems, contact your local waste disposal service or the shop where you purchased the item.
ARTSANA reserves the right to change information described in this manual at any time and without notice.
The reproduction, transmission, transcription or translation into another language, of any part and in any
form of this manual is strictly prohibited without prior written consent from ARTSANA
Warranty: The product is guaranteed against manufacturing defects for 2 years from the date of purchase.