Chicco 06620, Instructions For Use Manual

Page: 27 / 220

26 27
10. Loudspeaker for the reproduction of sounds
coming from the parent unit in Baby Monitor
mode or music in Music mode.
11. Audio input
12 . Power and link indicator light:
(a)Steady green: linked with parent unit
(b)Flashing green: absence of or loss of link with
parent unit
(c) OFF: baby unit off in Baby Monitor mode or
on in Music mode.
13. Alkaline battery status indicator light:
(a) Flashing red: Alkaline batteries almost flat
(b) OFF: Alkaline batteries charged or operation
via mains adapter (1)
14. Alkaline battery compartment closing panel
15. Baby unit power connector
16. Audio cable
1.3 Parent unit (primarily in receiver mode)
Model 06620
1. Power via supplied rechargeable 3.7V 800mAh
lithium-ion battery or via 100-240V ~ 50/60Hz
/6V
500mA mains switching adapter
2. On/Off button
3. Lit level indicator bar for sounds emitted by
the child
4. Button to activate parent-child communication
(“TALK” function)
5. 1.6” LCD display
6. Parent unit louds,- volume adjustment
buttons
7. Internal menu and confirmation selection
access button
8. Navigation Forward button
9. Navigation Back button
10. Microphone
11. Built-in loudspeaker for sound reproduction
of sounds emitted by the child in Baby Monitor
mode.
This performs the following additional functions
at the same time:
a) Absence of or loss of link between child and
parent unit signal function: approx. 10 seconds
after the power and link indicator light starts to
flash green, you will hear 2 consecutive beeps per
second. As soon as the link with the baby unit is
restored, the signal switches off and the power
and link indicator light will light up steady green.
b) Rechargeable lithium-ion battery status almost
flat signal function:
you will hear 1 beep per second and the
rechargeable lithium-ion battery status indicator
light will begin to flash red.
When charging of the rechargeable lithium-ion
battery begins, the beep switches off and the
rechargeable battery status indicator light lights
up steady red until charging is complete.
c) Reminder signal function.
12. Power and link indicator light:
(a) Steady green: linked with baby unit
(b)Flashing green: absence of or loss of link with
baby unit
(c) OFF: parent unit off in Baby Monitor mode or
on in Reminder mode.
13. Rechargeable lithium-ion battery status
indicator light:
(a)Flashing red: rechargeable battery almost flat
(b) Steady red: charging of rechargeable batteries
in progress via mains adapter
(c) OFF: rechargeable battery charged or
operation via mains adapter without rechargeable
battery
14. Rechargeable battery compartment closing
panel
15. Belt hook
16. Holes for support cord (not included)
17. Audio output
18. 3.7V 800mAh rechargeable lithium-ion
battery via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter
19. Power connector and/or rechargeable
lithium-ion battery charger
20. Headphones
1.4 Icons shown on the display
In Baby Monitor mode
In Reminder mode
Proper connection between units (only in
Baby Monitor mode)
Loss or lack of connection between units
(only in Baby Monitor mode)
Date and time
21°C Temperature detected in child’s room
(only in Baby Monitor mode)
--°C Temperature not detected
Voice activation function (only in Baby Mo-
nitor mode)
Vibration alarm set (only in Baby Monitor
mode)
Meal Reminder set
Measure fever reminder set
Medicine reminder set
Diaper change reminder set
Sleep reminder set
Minimum volume level (only in
Baby Monitor mode)
Maximum volume level (only in
Baby Monitor mode)
Rechargeable battery charged
Medium charging level on rechargeable battery
Low charging level on rechargeable battery
Rechargeable battery flat: the parent unit
will switch off within a few minutes
2. Description of features
2.1 Baby unit (primarily in transmitter mode):
2.1.1 Power:
Power via 100-240V~ 50/60Hz /6V
500mA (1) mains switching adapter or via two
1.5V AAA /LR03 Alkaline batteries (not included)
When power is supplied with mains adapter (1):
- insert the mains adapter jack (1) in the power
connector (15) on the side of the unit
- verify that the voltage corresponds to the rating
plate of the previously indicated adapters.
- insert the mains adapter plug in an easily
accessible power socket.
ATTENTION: