Chicco 06620, Instructions For Use Manual

Page: 36 / 220

36 37
The reminders for selection are the same as in
Baby Monitor mode.
The navigation procedure within this menu, date
and time setting, selection, setting, activation and
deactivation of reminders is the same as that in
Baby Monitor mode, illustrated in paragraph 3.
5. Installation and replacement of Alkaline
batteries in the baby unit (primarily in
transmitter mode) and the rechargeable
lithium-ion battery in the parent unit (primarily
in receiver mode)
Warning: these operations should only
be performed by an adult
Attention: RECOMMENDATIONS FOR
ALKALINE BATTERY USE
- Alkaline batteries must always be replaced
by an adult.
- alkaline batteries that are the same or
equivalent to the type recommended for the
operation of this product (Alkaline 1.5V AAA/
LR03).
- Insert batteries in the baby unit, making sure
that the insertion polarity is as indicated in the
battery compartment.
- Do not mix different types of Alkaline
batteries or discharged Alkaline batteries with
new batteries.
- Do not leave Alkaline batteries or any tools
within the reach of children.
- Do not short-circuit the power terminals.
- Always remove discharged batteries from the
product to avoid any possible liquid leaks that
may damage it.
- In case of prolonged non-use of the product,
always remove the batteries.
- Remove the Alkaline batteries from the device
before disposal.
-Do not throw discharged batteries in fire or
dispose of them in the environment; they must
be recycled.
- If the batteries are leaking liquid, replace them
immediately, making sure to clean the battery
compartment; thoroughly wash your hands if
they have come into contact with the liquid.
- Do not attempt to recharge non-rechargeable
batteries: they may explode.
- The use of rechargeable batteries is not
recommended as they may reduce the device’s
operability.
- The device is not designed to run on
replaceable lithium batteries. WARNING:
improper use may create hazardous conditions.
Attention: RECOMMENDATIONS FOR
LITHIUM BATTERY USE
- Do not dismantle, open or tear lithium batteries.
- Do not short-circuit lithium battery terminals.
Do not store lithium batteries in an improper way
inside boxes and/or drawers in which terminals
can be short-circuited by each other or can be
short-circuited by conductive material.
- Do not remove lithium batteries from their
original packaging upon use.
- Do not expose lithium batteries to heat or fire.
Do not expose to direct sunlight.
- Do not expose lithium batteries to mechanical
shock. In case of accidental falls, always check
the status of the container and contacts before
proceeding with re-use. Do not use if the lithium
battery is damaged as a result of the fall.
- In the case of liquid leakage from the battery,
be careful to avoid contact with skin and eyes
with the liquid. If contact occurs, wash affected
areas with plenty of water and seek medical
advice.
- Do not use any charger not specifically
provided for use with the equipment.
- Observe the markings (+) and (-) on the Lithium
battery and on the product to ensure proper
insertion and use.
- Do not use a lithium battery different from
that supplied to power the device.
- Keep Lithium batteries away from the reach
of children.
- This device has been designed to prevent and
inhibit the incorrect insertion of the lithium
battery: always observe the relative polarity
markings on the product and on the Lithium
battery to ensure proper use.
- Do not use a model of battery that is different
than that stated in this instruction manual in the
device. The battery purchase reference code is
COD20256500100
- Recharge the lithium battery only under
application and only using the mains adapter
supplied(COD 20256500200). Do not recharge
the lithium battery using an external battery
charger. Follow the instructions in this manual to
recharge the lithium battery.
- Keep the battery and the battery contacts clean
and dry. In the event that the contacts become
dirty, clean the terminals with a soft, dry cloth. Do
not use abrasives, chemicals or solvents to clean
the battery and its contacts.
- Lithium batteries require charging prior to
use. Always refer to the instructions for correct
charging procedures.
- Do not keep charging the lithium battery when
not in use.
- Keep the instructions manual for future
reference.
- Always remove the Lithium battery from the
product when not in use.
- Dispose of properly according to the information
in this manual.
5.1 Installing Alkaline batteries not included in
the baby unit (primarily in transmitter mode)
Remove the Alkaline battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.1).
Insert two 1.5 V Alkaline AAA/L03 batteries,
respecting the proper insertion polarity as
indicated in the battery compartment.
Reposition the Alkaline battery compartment
closing panel (14), first inserting the lower panel
hooks in their battery compartment housing and
gently pushing the panel toward the product
(fig.2).
5.2 Replacing Alkaline batteries not included in
the baby unit (primarily in transmitter mode)
Remove the Alkaline battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.1).
Remove the two 1.5 V Alkaline AAA/L03
batteries and replace them with 2 similar 1.5V
AAA/LR03 batteries, taking care to respect the
proper insertion polarity as indicated in the
battery compartment. Reposition the Alkaline
battery compartment closing panel (14), first
inserting the lower panel hooks in their battery
compartment housing and gently pushing the
panel toward the product (fig.2).