Chicco 06620, Instructions For Use Manual

Page: 37 / 220

36 37
recommended as they may reduce the device’s
operability.
- The device is not designed to run on
replaceable lithium batteries. WARNING:
improper use may create hazardous conditions.
Attention: RECOMMENDATIONS FOR
LITHIUM BATTERY USE
- Do not dismantle, open or tear lithium batteries.
- Do not short-circuit lithium battery terminals.
Do not store lithium batteries in an improper way
inside boxes and/or drawers in which terminals
can be short-circuited by each other or can be
short-circuited by conductive material.
- Do not remove lithium batteries from their
original packaging upon use.
- Do not expose lithium batteries to heat or fire.
Do not expose to direct sunlight.
- Do not expose lithium batteries to mechanical
shock. In case of accidental falls, always check
the status of the container and contacts before
proceeding with re-use. Do not use if the lithium
battery is damaged as a result of the fall.
- In the case of liquid leakage from the battery,
be careful to avoid contact with skin and eyes
with the liquid. If contact occurs, wash affected
areas with plenty of water and seek medical
advice.
- Do not use any charger not specifically
provided for use with the equipment.
- Observe the markings (+) and (-) on the Lithium
battery and on the product to ensure proper
insertion and use.
- Do not use a lithium battery different from
that supplied to power the device.
- Keep Lithium batteries away from the reach
of children.
- This device has been designed to prevent and
inhibit the incorrect insertion of the lithium
battery: always observe the relative polarity
markings on the product and on the Lithium
battery to ensure proper use.
- Do not use a model of battery that is different
than that stated in this instruction manual in the
device. The battery purchase reference code is
COD20256500100
- Recharge the lithium battery only under
application and only using the mains adapter
supplied(COD 20256500200). Do not recharge
the lithium battery using an external battery
charger. Follow the instructions in this manual to
recharge the lithium battery.
- Keep the battery and the battery contacts clean
and dry. In the event that the contacts become
dirty, clean the terminals with a soft, dry cloth. Do
not use abrasives, chemicals or solvents to clean
the battery and its contacts.
- Lithium batteries require charging prior to
use. Always refer to the instructions for correct
charging procedures.
- Do not keep charging the lithium battery when
not in use.
- Keep the instructions manual for future
reference.
- Always remove the Lithium battery from the
product when not in use.
- Dispose of properly according to the information
in this manual.
5.1 Installing Alkaline batteries not included in
the baby unit (primarily in transmitter mode)
Remove the Alkaline battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.1).
Insert two 1.5 V Alkaline AAA/L03 batteries,
respecting the proper insertion polarity as
indicated in the battery compartment.
Reposition the Alkaline battery compartment
closing panel (14), first inserting the lower panel
hooks in their battery compartment housing and
gently pushing the panel toward the product
(fig.2).
5.2 Replacing Alkaline batteries not included in
the baby unit (primarily in transmitter mode)
Remove the Alkaline battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.1).
Remove the two 1.5 V Alkaline AAA/L03
batteries and replace them with 2 similar 1.5V
AAA/LR03 batteries, taking care to respect the
proper insertion polarity as indicated in the
battery compartment. Reposition the Alkaline
battery compartment closing panel (14), first
inserting the lower panel hooks in their battery
compartment housing and gently pushing the
panel toward the product (fig.2).
5.3 Installing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
Upon purchase, the 3.7V 800mAh rechargeable
lithium-ion battery (18) in the parent unit is kept
separately in the product packaging.
Carefully remove the lithium-ion battery from
its packaging.
Remove the rechargeable battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.3).
Insert the lithium-ion battery (18), respecting
the proper insertion polarity as indicated in the
battery compartment.
Reposition
the rechargeable battery
compartment closing panel (14), first inserting the
lower panel hooks in their battery compartment
housing and gently pushing the panel toward the
product (fig.4).
5.4 Replacing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
If the duration of the rechargeable lithium-ion
battery is reduced excessively, this means that it
has run out and therefore must be replaced (this
is to be considered normal because rechargeable
batteries run out over time).
Remove the rechargeable battery compartment
closing panel (14), placing your finger near the top
groove and and gently pulling the panel outward
(fig.3). Remove the run out rechargeable battery
(18) and replace with another rechargeable
battery that is identical to the 3.7V 800mAh
supplied with the product (code20256500100 o
be requested directly from Artsana S.p.A.) taking
care to place them with the correct insertion
polarity indicated on the battery compartment.
Reposition
the rechargeable battery
compartment closing panel (14), first inserting the
lower panel hooks in their battery compartment
housing and gently pushing the panel toward the
product (fig.4).