14
Intelect® Neo Clinical Therapy System
The Intelect® Neo Patient Remote/Laser Interrupt Switch
buttons are described below. By default, the remote is not
assigned to any treatment. When assigned, the buttons
function as follows:
Intensity Up -
Operates the same as turning the Intensity
Dial clockwise for the assigned treatment.
Intensity Down -
Operates the same as turning the
Intensity Knob counter-clockwise for the assigned
treatment.
STOP -
Operates as a toggle switch between stopping and
resuming the assigned treatment.
• Operate as pause switch when assign to laser
treatment.
• Operates as pause switch when not assigned to any
treatment, it pauses all treatment.
• Operates as a toggle switch between pause and
resume if assigned to stim treatment.
M (Manual Stimulation) (Electrical Stimulation
treatments only)
When pressed for the
fi
rst time, will pause the treatment.
After the
fi
rst press, will ramp up and stimulate at desired
output if held down or will pause treatment if released.
Complete the following steps to assign the remote to a
treatment:
1. When the remote is plugged into the unit, a Remote
icon is displayed on the screen. Shown below:
NOMENCLATURE
PATIENT REMOTE/LASER INTERRUPT SWITCH
PATIENT REMOTE/LASER INTERRUPT SWITCH
INSTALLATION
Increase Intensity (1)
Decrease Intensity (2)
STOP
STOP/Pause Treatment (3)
M
Manual Stimulation (4)
To operate the Patient Remote/Laser Interrupt Switch,
plug the remote into the device on the Rear Access Panel
receptacle, as shown below:
• Patient Remote/Interrupt Switch is to be used under supervision of
a physician or licensed practitioner only.
!"#$%&'
Stop (3)
Increase (1)
Decrease (2)
Manual (4)
