Chattanooga Intelect Neo User Manual Download Page 58

Page: 58 / 84

Intelect® Neo Clinical Therapy System

ULTRASOUND OPERATION

The Intelect® Neo Clinical Therapy System Ultrasound

modality allows the user to select speci

c Applicator

recommendations and edit treatment parameters for

various syndromes requiring the use of ultrasound

therapy. The following information gives general

instructions for the setup of ultrasound therapy when

selecting Ultrasound from the Home screen.
Complete the following steps to begin Ultrasound

treatment:

1. Touch the screen to activate the system. Read and

carefully follow the instructions on the screen.

• To prepare the patient’s skin for Ultrasound Therapy,

prepare patient as described in page 47.

NOTE:

Use only Intelect® Neo Ultrasound Applicators.

Previous models of Chattanooga Ultrasound

Applicators will not work with the Intelect® Neo

Clinical Therapy System.

2. From the Home Screen, select the Ultrasound icon.

The screen below will appear:

• To view information explaining the modality, select

the Modality Description icon. Press the Up and Down

icons to view additional text. Press the Back Arrow

icon to return to the previous screen or the Home icon

to return to the Home screen.

• To view applicator information, press the Applicator

Information icon:

- Touch the body part you wish to treat

- Information about applicator sizes, frequency,

and treatment directions will appear as seen on

the screen below. Press the Down icon to scroll

through the information.

- Press the Back Arrow icon to return to the

previous screen or the Home icon to return to the

Home screen.

• Use the Intensity dial to set therapy intensity:

Clockwise – Increases Intensity

Counterclockwise – Decreases Intensity

3. Press the Start button to begin therapy, the Pause

button to pause treatment, or the Stop button to

terminate the treatment.

4. When treatment has completed, the Treatment

Summary screen will appear with the following

options:

• Save therapy information to USB Flash drive by

inserting a USB Flash drive into the device and

pressing the Save to USB Flash Drive icon.

• Repeat the treatment by pressing the Run This

Treatment icon.

• Save the treatment protocol by pressing the Save

Protocol icon. Refer to the CUSTOM PROTOCOLS

section for detailed instructions for saving customized

settings.

OPERATION

Summary of Contents for Intelect Neo





















































































Search results

Summary of Contents for Intelect Neo

Reviews:

Related manuals for Intelect Neo

Brands by name

Popular brands

Chattanooga Intelect Neo, User Manual

Search results

Summary of Contents for Intelect Neo

Reviews:

Related manuals for Intelect Neo

Brands by name

Popular brands