Chattanooga Intelect Neo User Manual Download Page 55

Page: 55 / 84

Intelect® Neo Clinical Therapy System

SEQUENCING

The Intelect® Neo Clinical Therapy System o

ers

sequencing for special electrotherapy waveform treatment

purposes and stores these protocols in the system

memory for recall and use. Sequencing allows you to link

up to 3 electrotherapy protocols together to encompass

one treatment session. Each sequence can have up to

3 protocols. The Intelect® Neo Clinical Therapy System

memory will accommodate up to 200 user-de

ned

protocols, including all user protocols, sequences, and

system default protocols. The Intelect® Neo Clinical Therapy

System denotes default protocols with an * before the

named sequence.

Complete the following steps to create and access

customized sequences:
1. Select the Electrotherapy icon from the Home screen.

2. Select the Sequencing icon.

3. Select a sequence from the list box by using the Up

and Down arrows to find the desired sequence and

press the

√

icon. The screen above will appear.

4. Make any desired changes to the existing sequences

by using the Up and Down arrows to find the desired

sequence and press the Edit icon. This screen also

allows you to:

• Delete a sequence from the protocol by pressing the

Delete icon.

• Add a new sequence to the protocol by pressing the

New icon and using the Up and Down arrows to find

the desired protocol in the list box. Press the

√

icon to

add the new sequence.

• Save the newly created sequence by pressing the

“Save” icon and following the saving a treatment

protocol instructions listed in the OPERATION section,

Electrotherapy.

5. Set the intensity for each protocol by using the Up and

Down arrows for each sequence and press the Start

button to begin treatment.

6. When treatment is completed, the Treatment

Summary screen will appear with the following

options:

• Save therapy information to USB Flash drive by

inserting a USB Flash drive into the device and

pressing the Save to USB Flash Drive icon.

• Repeat the treatment by pressing the Run This

Treatment icon.

• Save the treatment protocol by pressing the Save

Protocol icon. Refer to the CUSTOM PROTOCOLS

section for detailed instructions for saving customized

settings.

OPERATION

Summary of Contents for Intelect Neo





















































































Search results

Summary of Contents for Intelect Neo

Reviews:

Related manuals for Intelect Neo

Brands by name

Popular brands

Chattanooga Intelect Neo, User Manual

Search results

Summary of Contents for Intelect Neo

Reviews:

Related manuals for Intelect Neo

Brands by name

Popular brands