44
Intelect® Neo Clinical Therapy System
7. Select Vacuum Mode: In continuous mode, the
vacuum unit will maintain the desired vacuum
pressure.
8. With the Vacuum Electrodes placed face down on
a clean, firm surface, increase the intensity of the
Vacuum with the Vacuum Intensity Knob until the
electrodes are secure on the surface. Individually
remove each electrode from the surface and place on
the treatment area of the patient, as prescribed.
NOTE:
Adjust Vacuum intensity until Vacuum
Electrodes are secure to patient.
Note: Do not use Vacuum Electrodes with sEMG,
sEMG+STIM waveforms and Iontophoresis.
For Vacuum OPERATION, refer to page 52.
VACUUM ELECTRODE PATIENT PREPARATION
(
CONTINUED
)
PATIENT PREPARATION
