5
Intelect® Neo Clinical Therapy System
3. Place the Neo Head on the cart facing toward the
drawers.
4. Fasten the Neo Head to the cart using four screws to
connect the base to the Neo Head.
5. If desired, replace the closed Handles with the open
Handles. Each Handle is attached with four screws as
shown.
6. Reinstall the drawer
The optional Therapy System Cart, PN 70001, is designed
for use with the Intelect® Neo Clinical Therapy System
only and allows the user to easily transport the System
from patient to patient within the clinic as well as store all
necessary accessories, supplies, and applicators used for
the various modalities of the System.
Tools required (not included): #2 Phillips screwdriver and
standard slotted screwdriver.
Remove the Intelect® Neo Clinical Therapy System from
the shipping carton. Visually inspect for damage. Report
any damage to the carrier immediately.
To assemble the Intelect® Neo Head to the Cart, follow
these steps:
1. Remove the top drawer from the Cart. Pull the drawer
open. Press the plastic tabs on both drawer slides
simultaneously in opposite directions, as shown. Pull
the drawer completely out.
2. Remove the base from the head unit first prior to
placing it on the cart. Do this by removing the four
screws from the underside of the base where they
secure to the Neo Head. Retain for use when attaching
the Neo Head to the Cart.
HEAD TO CART ASSEMBLY
SETUP
Screws
