Case Communications syncro 1496, Reference Manual

Page: 116 / 192

Nn&Z Store a Telephone Number
This command is used to store a telephone number in the modem's
directory. You can also use modifiers, for example to include ASCII
text identifying the service, and to store an associated modem
configuration.
Nn&Znn where n is the directory location (0-20) and nn the
number and modifiers. A blank
n
is equivalent to 0.
Modifiers
:: Store a Remark with a Telephone No
Telephone numbers may have remarks stored with them, which
are displayed when the number is dialled.
Each remark entered must be within colon delimiters.
Remarks must come immediately after the command, but before
the phone number and any instructions connected with the
phone number.
Thus, with the phone number alone, remarks are situated as
follows:
AT N1&Z : Head Office : 0123456789
If other instructions are included:
AT N1&Z : Head Office : T9, 0123456789
Spacing is not necessary, we've used it just for clarity.
< > Secure Telephone No
Angled brackets may be used to designate secure phone
numbers, i.e. phone numbers that you do not wish to appear on
the screen.
To do this the phone number must be typed between angled
brackets:
AT N1&Z <0123456789>
As a number enclosed within < > will not be displayed during
dialling or in the directory display, it is advisable to include
Remark text with such numbers (see : : above).
X450-310851 Issue 2 8-14 Rev.0