Case Communications syncro 1496, Reference Manual

Page: 111 / 192

%E7 and it is subsequently changed to %E4 you will have no
further configuration control over the remote modem.
A working example of this and the other remote configuration
commands is given in Section 5.5.
''E Security Control
This command is used to enable or disable the security features of
your modem.
''E0
Security disabled.
''E1 Security enabled. Default.
If security is enabled, you need to use commands ''W and ''Z . See
also Section 5.6.
F Communications Format
This command is used to determine which modulation scheme and
primary data rate are used by the modem. (A fallback rate may
also be specified – see
/F
.)
F4 V.22, 1200 bps.
F5 V.22bis, 2400 bps.
F13 V.29, 4800 bps.
F14
V.29, 7200 bps.
F15 V.29, 9600 bps.
F21 V.32, 4800 bps
F22
V.32, 9600 bps.
F24
V.32, 9600 bps TCM (trellis code modulation).
F27 V.33, 12000 bps.
F28 V.33, 14400 bps.
F35
V.32bis, 12000 bps.
F36 V.32bis, 14400 bps.
F37 V.32bis, 7200 bps.
&F
Recall Factory Configuration
This command recalls one of the factory configurations to become
the modem's active configuration.
&Fn where n is the factory configuration number (0-11).
X450-310851 Issue 2 8-9 Rev.0