Case Communications syncro 1496, Reference Manual

Page: 137 / 192

CRS
Dial a stored number. The V.25bis directory is the same as the AT
directory except that it does not use location 0.
CRSxx
where xx is a two-digit number.
DIC Disregard incoming call. When an incoming call's response (INC)
is displayed, this command can be used to instruct the modem not to
answer that particular call. The command must be sent within five
seconds of the incoming call's response being displayed, otherwise
the call is connected.
DLN
Redial last number.
EON
Echo on. This command instructs the modem to echo the commands
back to the DTE.
EOF Echo off. This command instructs the modem not to echo the
commands back to the DTE.
PRI
Program identity number.
PRIiii
where iii is the identity number (up to 20 characters).
PRN Store a telephone number and its modifiers (a maximum of 20
characters).
PRNxx;nnn
where:
xx
= directory number (1 to 20)
;
= required syntax separating the number
nnn = the telephone number and its modifiers.
RLD Request delayed number list. (RLDxx for a particular entry.)
RLF Request blacklisted number list. (RLFxx for a particular entry.)
Note that the modem's blacklist mechanism only affects numbers
dialled with the 'U' modifier (automatic dialling by the modem).
Only these numbers can be “delayed” or “blacklisted”.
RLI Request identity number.
RLN Request telephone number list. (RLNxx for a particular entry.)
X450-310851 Issue 2 10-3 Rev.0