Case Communications syncro 1496, Reference Manual

Page: 50 / 192

Factory Configuration 6
Operation : 4-wire leased line, V.32bis, answer mode.
Rates : Primary 14400, fallback 12000.
V.24 : Normal.
Commands : AT via the command port.
Typical Use : The modem is set to answer mode. Although set to 4-wire
operation it is necessary in V.32bis mode to set an
originate configuration at the other end of the link.
Factory configuration 7 is provided for this purpose.
Configuration Screen F6
F36 Communication Format 14400 V32bis *V0 Command Mode AT
X6 Result Codes ALL *W0 DSR Control NORMAL
&B0 Busy Out Control DISABLED ”A1 Leased Line Mode ANSWER
&G0 Guard tone OFF ”D0 Restore on DTR DISABLED
&L3 Line Mode 4W PRIVATE LINE ”E1 Security Control ENABLED
&Q1 Operation Mode SYNC ASYNC DIAL ”N3 Remote Logon ORIG & ANS
&R0 RTS/CTS Delay 0mS ”Q0 Quality Mon LL DISABLED
&S1 Switches ENABLED /B1 Carrier CONSTANT
&X0 Timing Source INTERNAL /C1 Cable Equaliser ENABLED
%B0 Pin 23 Fallback DISABLED /D1 DCD Threshold –33dB
%E7 Remote Control USER & LINE /F35 Fallback Format 12000 V32bis
%F0 Fallback DISABLED /G1 T/2 Equaliser ENABLED
%Q0 Interface Control DISABLED /Q0 Quality Mon PSTN DISABLED
*B1 S10 DCD Timeout 40 Secs /R1 S26 Base RTS/CTS X 1mS
*M0 Data Monitor OFF /S1 Response EXTENDED
*R0 RTS Clamp OFF /T4 Test Pattern MARKS/ERR INJ
*T1 DCD Timeout LOSS /W1 S37 Mon. Timeout 0 Mins
*L0 Dial backup DISABLED /Y2 Re-Training AUTO RETRAIN
X450-310851 Issue 2 4-14 Rev.0