''Xnnn
where
nnn
is the telephone number of the remote
modem's LINE 3 (PSTN 1)
See Section 5.7.
/Y
Training Sequence
This command allows you to select the method of modem training.
/Y0
Training disabled.
/Y1
Train on data.
/Y2
Auto retrain. Default.
Auto retrain causes a receiving modem to issue a training sequence
to the remote modem if the error rate becomes too high.
Z
Recall User Configuration
This command will recall a previously-configured user
configuration to become the active configuration.
Zn
where
n
is the user configuration number (0-3).
%Z
Modify the Remote Configuration
This comand allows you to alter the locally-held copy of the remote
modem's active configuration. Subsequent commands will affect
only this copy, until the
%W
command is issued. (The
&L
and
''E
commands cannot be downloaded from one modem to another.)
''Z
Password Store
This command is used to store an eight-character alphanumeric
password. The modem will return
ERROR
if other than eight
characters are entered.
AT''Znnnnnnnn
where
nnnnnnnn
is the password.
Note that passwords are case-sensitive.
See Section 5.6.
X450-310851 Issue 2
8-27
Rev.0
Summary of Contents for syncro 1496
