5
Advanced Configuration
This chapter tells you which commands are relevant for various aspects of
modem configuration.
The most important commands are:
F
to select the communications format
&Q
to determine how to perform with DTR
*T
to disconnect the modem on loss of carrier
Each command is fully described in Chapter 8.
5.1 Display and Modem Mode Commands
These commands are used to determine the kind of display produced by
various functions, and to activate/deactivate various modes in which the
modem may operate.
''A
Originate or answer mode
E
Echo commands
Q
Quiet mode
&S
Front panel switch control
X
Response codes
/S
Extra response codes
V
Verbose response codes
Originate/Answer Mode
For V.32, V.32bis, V.22 and V.22bis leased line operation, one modem must
be set to 'originate' mode and the other to 'answer' mode.
(In PSTN mode, originate or answer status is determined automatically
according to whether a modem is originating, or answering a call.)
X450-310851 Issue 2
5-1
Rev.0
Summary of Contents for syncro 1496
