Case Communications syncro 1496, Reference Manual

Page: 63 / 192

4.3 Loading a Configuration from the Front Panel
1. Power off the modem and ensure all buttons are in the 'Out' position.
2. Press the
LOAD
button.
3. Select your configuration by pressing the appropriate buttons shown in
Table 4-1.
Table 4-1 Loading a Configuration
CONFIGURATION
BUTTON SELECTION
4 2 1 DIAL
Factory 0
Factory 1
Factory 2
Factory 3
Factory 4
Factory 5
Factory 6
Factory 7
Factory 8
Factory 9
Factory 10
Factory 11
User 0
User 1
User 2
User 3 Out
Out
Out
Out
In
In
In
In
Out
Out
Out
Out
In
In
In
In
Out
Out
In
In
Out
Out
In
In
Out
Out
In
In
Out
Out
In
In
Out
In
Out
In
Out
In
Out
In
Out
In
Out
In
Out
In
Out
In
Out
Out
Out
Out
Out
Out
Out
Out
In
In
In
In
In
In
In
In
4. Press and hold the
DATA
button whilst powering the modem ON.
Continue to hold the
DATA
button depressed for three seconds.
5. Release the
DATA
button and return all other buttons to the 'Out'
position.
The
RUN
indicator illuminates to confirm configuration loaded.
Configurations can also be manipulated by AT commands – see Section 4.4.
X450-310851 Issue 2 4-27 Rev.1