Case Communications syncro 1496, Reference Manual

Page: 7 / 192

6.1.1 Storage 6-1
6.1.2 Retrieval 6-2
6.2 Dialling a Telephone Number
6-3
6.2.1 Autodialling via the Front Panel 6-3
6.2.2 Manual Dialling by Attached Telephone 6-4
6.2.3 Autodialling by DTR 6-4
6.2.4 Dialling by Command
6-4
6.2.5 Connection Sequence 6-5
6.2.6 The Blacklist 6-5
6.3 Answering Calls
6-6
6.3.1 Auto-answer
6-6
6.3.2 Answering by Command 6-6
6.4 Dial Backup 6-7
6.4.1 Single Call Dial Backup
6-8
6.4.2 Automatic Dial Backup with Autorestoral 6-9
6.4.3 Manual Dial Backup via the Front Panel 6-9
6.4.4 Manual Dial Backup via Software Command 6-9
6.5 Rate Adaption (Fallback/Fallforward)
6-10
6.5.1 Manual Fallback 6-10
6.5.2 Auto Fallback 6-10
7 Diagnostic Facilities 7-1
7.1 Introduction 7-1
7.2 Test Details 7-2
7.2.1 Local Analogue Loopback
7-2
7.2.2 Remote Digital Loopback 7-3
7.3 Testing via the Front Panel 7-4
7.3.1 Local Analogue Loopback
7-4
7.3.2 Remote Digital Loopback
7-5
7.4 Testing by Command 7-6
7.4.1 Local Analogue Loopback 7-6
7.4.2 Remote Digital Loopback
7-7
7.5 Analogue Parameters 7-8
7.6 Additional Modem Status Codes 7-11
8 The AT Commands
8-1
8.1 Introduction 8-1
8.2 The Commands 8-2
9 S-Registers 9-1
9.1 Introduction 9-1
X450-310851 Issue 2 0-7 Rev.1