Factory Configuration 2
Operation
:
Leased line, V.32bis, automatic dial backup
Rates
:
Primary 14400, fallback 12000.
V.24
:
Normal.
Commands
:
AT via the command port.
Typical Use
:
The modem operates in originate mode. Automatic dial
backup is enabled and on originating a dial backup
connection, the modem will perform a password check on
the answering modem. Once verified, transmission is
switched to the dial line. Disconnection and return to
leased line operation is by AT command, at either end of
the link.
A default password has been stored in the modem. If this
is deleted, the modem will omit the password check and
merely verify the state of the PSTN line before switching
to dial backup.
The configuration for dial backup may be stored in a user
configuration location and associated with the
appropriate telephone number.
The telephone number for automatic dial backup must be
stored in the modem in location N8 of the dialling-end
modem, which is then the master modem for dial backup
operation.
X450-310851 Issue 2
4-8
Rev.0
Summary of Contents for syncro 1496
