Factory Configuration 3
Operation
:
Leased line, V.32bis, automatic dial backup and restoral.
Rates
:
Primary 14400, fallback 12000.
V.24
:
Normal.
Commands
:
AT via the command port.
Typical Use
:
The modem operates with automatic dial backup and
restoral to leased line. Dial backup is automatically
initiated if the leased line connection is lost.
If the modem subsequently detects that the leased line has
recovered, the dial backup connection is automatically
broken and transmission is restored to the leased line.
The telephone number for automatic dial backup must be
stored in the modem in N8 of the dialling-end modem.
A default password has been stored in the modem. If this
is deleted, the modem will omit the password check and
merely verify the state of the PSTN line before switching
to dial backup. The configuration for dial backup may be
stored in a user configuration location. For further
information on dial backup see Section 6.4.
X450-310851 Issue 2
4-10
Rev.0
Summary of Contents for syncro 1496
