Cradlepoint COR IBR1100 series Manual Download | Manualshive

Page: 1 / 161

background image

CradlePoint COR IBR1100/IBR1150 – Manual

Highly Available, Cloud-Managed Networking for Extreme Conditions

The CradlePoint COR IBR1100 Series is a compact, ruggedized 3G/4G/LTE networking solution designed for mission critical connectivity in the most challenging
environments.

Ideal for in-vehicle networks including police cars, ambulances, and mass transit, this cloud-managed solution provides organizations the ability to scale deployments quickly
and manage their vehicle networks easily in real-time.

With an extensive list of safety and hardening certifications, the COR IBR1100 is engineered to protect against extreme temperatures, humidity, shocks, vibrations, dust, water
splash, reverse polarity and transient voltage.

Key Features

Cloud-managed for zero-touch deployment and intelligent management
Internal 3G/4G modem with secured SIM card access and dual SIM slots
LTE support for all major U.S. carriers and Europe/international operators (failover to HSPA+ or EVDO)
Software-defined radio supports multiple carriers (Gobi)
WiFi (IBR1100) and non-WiFi versions (IBR1150) available: IBR1100 includes dual-band dual-concurrent 2.4/5 GHz 802.11 a/b/g/n/ac WiFi; 2 x 2 MIMO with two
external dual-band antenna connectors
Ignition sensing
Ruggedized: protects against vibration, shock, dust, splash, & humidity
Built-in transient and reverse polarity voltage protection; 9–36 DC voltage input range

CradlePoint COR IBR1100/IBR1150 – Manual

10/13/2014

1

1
2
3
...
»

Summary of Contents for COR IBR1100 series


































































































































































Reviews:

No comments

Related manuals for COR IBR1100 series

Brand: Datakom Pages: 23

Brand: Optical Systems Design Pages: 12

Brand: Skypatrol Pages: 33

Brand: US Robotics Pages: 129

MultiModem MTCBA?EV1?U1?N3

Brand: Multitech Pages: 24

Brand: Scientific Atlanta Pages: 92

Brand: HORNER Pages: 40

Brand: Elastic Networks Pages: 32

Brand: Eaton Pages: 2

Brand: Paradyne Pages: 85

Brand: Spectrum Pages: 7

Brand: Spectrum Pages: 6

Brand: Eurotech Pages: 120

Brand: Datatronics Pages: 116

Brand: NETGEAR Pages: 35

Brand: RCA Pages: 9

Brand: Telstra Pages: 8

Business Smart Modem

Brand: Telstra Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands