manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 343 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 343

2.

Check both ends of the printer cable — at the computer and at the MultiPASS — to confirm
that the cable is securely fastened.

3.

Confirm that the MultiPASS is configured for the correct parallel port in the Details tab
(Windows 98 and Windows 95) or the Ports tab (Windows NT 4.0) of the Printer Properties.
In addition, for Windows 98 or Windows 95, confirm that there are no port conflicts in the
Device Manager tab of the Systems Properties.

4.

Remove any pass-through devices, switch boxes, zip devices, tape backups, docking stations,
scanners, and any software associated with these products. The software drivers for these
products are customarily executed from the Load and Run lines of the computer’s Win.ini or
the Startup Group. Please refer to the product’s manufacturer for information on how to
properly remove the hardware and software.

5.

If the above procedures do not resolve the problem, please call the Canon Customer Care
Center; see 

page 1-14

for details.

Chapter 8

Troubleshooting

8-48

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments