manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 299 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 299

Clearing Jams

On occasion, the document feeding into the Automatic Document Feeder (ADF) or the paper in
its multi-purpose tray may misfeed or jam. If this happens, you can usually fix the problem using
one of the following procedures.

n

You do not need to unplug the MultiPASS while clearing paper jams.

Jams in the Automatic Document Feeder (ADF)

Use this procedure if the document in the ADF jams or misfeeds. If this occurs, the message

CHECK DOCUMENT

appears in the LCD display.

1.

Press 

Stop

.

2.

Open the operation panel by gently pulling it toward you.

■

It opens only slightly.

■

Do not try to pull the document out without opening the operation panel or you may
tear or smudge the document.

Stop

Chapter 8

Troubleshooting

8-4

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments