manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 324 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 324

Blue looks like purple.

Blue prints out as purple because of the difference in color technology used by the screen and
the MultiPASS; the screen uses RGB (Red, Green, Blue) color and the MultiPASS uses CMYK
(Cyan, Magenta, Yellow, Black) color. Due to the technology differences, when cyan and 
magenta are mixed together, blue prints dark blue or purple compared to the screen.

■

Within the MultiPASS printer driver, select the appropriate Color Adjustment setting on the
Color tab (see 

page 3-14

). If you are not using screen matching, decreasing the amount of

magenta by 30% produces a royal blue.

■

If you are just looking for a nice blue color, try cyan. It prints beautifully and fast, and is 
available in almost all applications that support color.

Color images are missing some detail.

The print mode may be wrong.

■

Check your Print Mode setting on the Main tab of the printer driver (see 

page 3-8

).

Chapter 8

Troubleshooting

8-29

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments