Home
/
Canon
/
MultiPASS C530
/
User Manual

Canon MultiPASS C530, User Manual, Page: 138 / 383

Share

Page: 138 / 383

Canon MultiPASS C530 User Manual Download Page 138

Working With Print Options (Windows NT)

This section provides information on setting and changing your printing options if you are
using Windows NT. If you are using Windows 98/95, see the “

Working With Print Options

(Windows 98/95)

” section presented earlier in this chapter.

Changing the Printer Settings: A Summary

Print options are the settings that determine how your document looks when it is printed.
Print options are initially installed using default settings, allowing you to print documents
immediately. However, you may want to change these settings for certain documents.

The following instructions summarize the general procedures for changing printer settings.
For detailed information on specific printer options, refer to later sections in this chapter.

To change print options:

1.

With your document open, click the

Print

command. (In most Windows applications,

this command is on the File menu or toolbar.)

2.

In the Print dialog box, click

Properties

.

Chapter 3

Printing

3-41

«
...
136
137
138
139
140
...
»

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments