manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 187 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 187

Copying Documents

One of the convenient features of your MultiPASS is its ability to make up to 99 high-quality
black & white copies. It can also make one color copy of a document at a time.

n

Be sure to adjust the document feed lever before loading your document.

Selecting Automatic/Manual Document Feed

1.

Open the document tray.

2.

Prepare the document and load it, facedown, in the ADF.

■

The LCD display shows the following:

Currently used memory:

Standby to scan:

3.

Select color or black & white copying.

■

For color copying, press 

Color/B&W

to turn on its light.

■

For black & white copying, make sure the 

Color/B&W

light is off. If the 

Color/B&W

light is on, press 

Color/B&W

to turn it off.

 Color / B&W

 Color / B&W

DOCUMENT READY

MEMORY USED

0%

Chapter 4

Document Handling

4-21

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments