manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 222 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 222

Delayed Sending

Your MultiPASS allows you to scan a document into its memory and send it automatically at a pre-
set time. This feature is called 

Delayed sending

or 

Timer sending

. By using this feature, you can take

advantage of lower long distance rates at night, for example.

n

You can only set this feature from the MultiPASS Desktop Manager. (See the online 

MultiPASS

Desktop Manager Software Guide

for details.)

Sending Other Documents While the MultiPASS Is Set for Delayed Sending

The MultiPASS is a multitasking unit, so you can send, receive, print, or copy other documents
even when you have set the MultiPASS for delayed sending.

To print, copy, or send other documents after setting the MultiPASS for delayed sending, simply
follow the procedures described in this manual.

Chapter 5

Sending Faxes

5-27

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments