Canon MultiPASS C530 User Manual Download Page 226

Page: 226 / 383

■

The marks before the transaction number (TX/RX NO.) have the following meanings:
(No mark): The document is in black & white.

The document is in color.

The document is in black & white and is being sent or printed
automatically.

The document is in color and is being sent or printed automatically.

■

If you are unsure of the transaction number (TX/RX NO.) of the document you want to
print, you can print the list of documents stored in memory.

Printing a List of Documents in Memory

■

Use

to display the details of the transaction (destination, for example).

Press

Set

YES=(

)

NO=(

)

1ST PG ONLY?

Set

Chapter 5

Sending Faxes

5-31

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Search results

Summary of Contents for MultiPASS C530

Reviews:

Canon MultiPASS C530, User Manual, Page: 226 / 383

Search results

Summary of Contents for MultiPASS C530

Reviews: