Canon MultiPASS C530 User Manual Download Page 227

Page: 227 / 383

Select whether you want to print the first page of the document only, or all pages of the
document.

Press

to print the first page only.

-or-

Press

to print all pages.

If you have the BC-21e Color BJ Cartridge installed, the MultiPASS starts printing the
document.

If you are printing a black & white document and have the BC-20 Black BJ Cartridge
installed, the MultiPASS starts printing the document.

If you are printing a color document and have the BC-20 Black BJ Cartridge installed, the
following messages alternate in the LCD display:

Press

to print the document in black & white with the BC-20 Black BJ Cartridge.

-or-

Press

to cancel printing. The unit returns to step 5.

YES=(

)

NO=(#)

CONVERT CLR>B&W?

SYMBOLS

Tone

Chapter 5

Sending Faxes

5-32

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Search results

Summary of Contents for MultiPASS C530

Reviews:

Canon MultiPASS C530, User Manual, Page: 227 / 383

Search results

Summary of Contents for MultiPASS C530

Reviews: