manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 336 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 336

The MultiPASS may not be set for the type of telephone line in use (pulse/tone).

■

If you have a pulse line, make sure the MultiPASS is set for pulse dialing. (If you are using the
Desktop Manager, see the online 

MultiPASS Desktop Manager Software Guide

. If you are using

the operation panel, see the online 

Stand-alone Fax Manual

.)

The phone disconnects while you are talking.

The phone cord may not be plugged in securely.

■

Check that the phone cord is connected securely to the unit and into the phone jack on the
wall. Then confirm that the phone is securely connected to the unit.

Chapter 8

Troubleshooting

8-41

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments