manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 297 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 297

If You Cannot Solve the Problem

If you have a problem with your MultiPASS and you cannot resolve it by referring to the 
information in this chapter, contact your local authorized Canon dealer sales or service 
representative.

Canon’s support personnel are trained in the technical support of Canon’s products and should 
be able to help you with your problem.

n

Attempting to repair the MultiPASS yourself may void the limited warranty as to that repair. See
the limited warranty card for details.

c

If the MultiPASS makes strange noises, emits smoke or strange smells, unplug it immediately
and call the Canon Customer Care Center. Do not attempt to disassemble or repair the unit
yourself.

Getting Help From Canon

If you need to contact Canon directly, make sure you have the following information:

■

Product name
MultiPASS C560 or MultiPASS C530

Chapter 8

Troubleshooting

8-2

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments