manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 248 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 248

BCI-21 Black Ink Tank has run out of ink

The BCI-21 Black Ink Tank installed in the MultiPASS has run out of ink while printing.

Change the BCI-21 Black Ink Tank in the BC-21e Color BJ Cartridge. The unit automatically
prints the pages stored in memory.

Replacing an Ink Tank in the BC-21e Color BJ Cartridge

BJ cartridge has run out of ink

The BJ cartridge installed in the MultiPASS has run out of ink while printing.

Change the BJ cartridge. The unit automatically prints the pages stored in memory.

Replacing the BJ Cartridge

BJ cartridge not installed

There is no BJ cartridge installed in the MultiPASS.

Install a BJ cartridge. The unit automatically prints the pages stored in memory.

Replacing the BJ Cartridge

PUT IN CARTRIDGE

CHANGE CARTRIDGE

BLACK INK EMPTY

Chapter 6

Receiving Faxes

6-13

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments