Canon MultiPASS C530, User Manual, Page: 239 / 383

Receiving Both Faxes and Telephone Calls Automatically: Fax/Tel Mode
Set this mode if you want your MultiPASS to automatically switch between voice and fax calls. For
this mode, you need to have a telephone connected to your unit.
What Happens When Fax/Tel Mode is Selected
Telephone Fax Fax
Sending document
manually
Sending document
automatically
The MultiPASS answers without ringing.
The MultiPASS listens for the fax tone.
(For 8 sec.)
The fax tone
is detected.
The fax tone is not detected.
The document is
received automatically.
The MultiPASS starts ringing.
Pick up the
handset to talk.
If you don’t pick up the handset
(within 15 sec.).
DEFAULT ACTION
Choose between:
RECEIVE
(factory default setting) and
DISCONNECT
.
DISCONNECT
RECEIVE
(Factory default setting)
(The fax tone is
detected and the
MultiPASS switches
to receive mode.)
The MultiPASS
disconnects the call.
Not all fax machines are capable of sending a fax
tone. For those cases if you set the
DEFAULT
ACTION
to
RECEIVE
, the MultiPASS switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approximately 55 seconds.
F/T RING TIME
(Factory default
setting =15 sec.)
RING START TIME
(Factory default
setting = 8 sec.)
Type of call
Telephone charges
begin for the caller.
Chapter 6 Receiving Faxes
6-4