manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 338 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 338

The BJ cartridge or an ink tank may not be installed properly.

■

Make sure the BJ cartridge and the ink tank(s) are installed properly (see 

page 7-23

and

7-33

).

The MultiPASS may not be operating properly.

■

Try to print a document from your PC.

MEMORY FULL appears in the LCD display when making multiple copies.

The MultiPASS memory is full.

■

Print out any faxes stored in memory (see 

page 5-29

), then start again.

General Problems

The MultiPASS has no power.

The power cord may not be plugged in securely.

■

Check that the power cord is plugged securely into the unit and into the wall outlet. If the
unit is plugged into a power strip, make sure the power strip is plugged in and turned on.

The power cord may not be supplying power.

■

Check the power cord by substituting another, or by using a voltmeter to test it for continuity.

Chapter 8

Troubleshooting

8-43

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments