manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 214 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 214

Redialing When the Line Is Busy

There are two methods of redialing: manual redialing and automatic redialing.

Manual Redialing

Press the 

Redial/Pause

button to dial the last number you dialed with the numeric buttons.

(This also starts redialing regardless of whether automatic redialing is enabled.)

Canceling Manual Redialing

To cancel manual redialing, press the 

Stop

button.

Automatic Redialing

When you are using memory sending and the other party’s line is busy, the unit waits a specified
time and then dials the same number again. You can set the MultiPASS to redial several times if the
previous attempts failed because the line was busy. This feature is called automatic redialing.

After the initial dial attempt, the default setting is to wait two minutes and try to dial again. If the
second attempt fails because the line was busy, the unit will again wait for two minutes and make a
final attempt to complete the call. (Even if the MultiPASS is set to redial several times, it will redial
only once if there is no tone or there is a ring back tone during the first attempt.)

You can turn automatic redialing off and on. Also, you can adjust the number of redialing attempts
and the time interval between attempts.

Chapter 5

Sending Faxes

5-19

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments