manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 339 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 339

The MultiPASS will not print reports.

The MultiPASS may have the BC-21e Color BJ Cartridge installed, and its black ink tank may be
empty.

■

Replace the black ink tank (see 

page 7-33

).

The MultiPASS may have a BC-22e Photo BJ Cartridge installed.

■

The MultiPASS cannot print reports while a BC-22e Photo BJ Cartridge is installed. Replace
the BJ cartridge with the BC-21e Color BJ Cartridge or a BC-20 Black BJ Cartridge (see 

page 7-23

).

Nothing appears in the LCD display.

The power cord may not be plugged in securely.

■

Check that the power cord is plugged securely into the unit and into the wall outlet. If the
unit is plugged into a power strip, make sure the power strip is plugged in and turned on. If
the display remains blank, unplug the MultiPASS, wait five seconds, then plug it in again.

Chapter 8

Troubleshooting

8-44

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments