Canon MultiPASS C530 User Manual Download Page 205

Page: 205 / 383

Open the document tray.

Prepare the document and load it, facedown, in the Automatic Document Feeder (ADF).

■

The LCD display shows the following:

Currently used memory:

Standby to scan:

■

If you are sending in color to a fax machine with color capability, press

Color/B&W

turn on its light.

■

If necessary, you can adjust the resolution and contrast.

■

You may not be able to use memory sending if the percentage shown in the

MEMORY

USED

display is close to 100%. In this case, use manual sending to send your document.

Dial the other party’s fax number.

■

Use one of the dialing methods described earlier in this chapter.

Ex:

■

If you enter the wrong number, press

Stop

, then enter the correct number.

■

If you must first dial a digit to get an outside line (9 for example), add a pause after that
digit by pressing

Redial/Pause

TEL=

9p7654321

DOCUMENT READY

MEMORY USED

Chapter 5

Sending Faxes

5-10

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Search results

Summary of Contents for MultiPASS C530

Reviews:

Canon MultiPASS C530, User Manual, Page: 205 / 383

Search results

Summary of Contents for MultiPASS C530

Reviews: