manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 221 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 221

4.

Press 

Start/Scan

to begin scanning for sending, or wait a few seconds for the MultiPASS to

begin scanning automatically.

■

The MultiPASS then scans the document into memory, and begins sending it to the 
destinations.

■

You will see a series of brief messages showing details on the transmission.

■

To cancel sending, press 

Stop

. You will be asked to confirm canceling. Press 

T

to cancel.

Sending to all destinations you specified in step 3 will be canceled. (You cannot cancel
only one destination.)

n

●

If a number is busy, the unit will continue sending to the other destinations and then redial the
number that was busy.

●

If the MultiPASS memory becomes full while scanning your document,

MEMORY FULL

appears in the LCD display. If this happens, remove the remainder of the document from the
ADF (you may need to open the operation panel to do so), then divide the document into 
several sections and send each section individually.

●

The document is automatically deleted from memory when sequential broadcasting is 
completed.

Start / Scan

Chapter 5

Sending Faxes

5-26

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments