manualshive.com logo in svg

Canon MultiPASS C530, User Manual, Page: 182 / 383

Share
Download
Canon MultiPASS C530 User Manual Download Page 182

Chapter 4

Document Handling

4-16

Adding Pages to the Document

The MultiPASS Automatic Document Feeder (ADF) can hold up to 20 letter, 20 A4, or 10 legal-
size pages at a time when the document feed lever is set to automatic document feed. If your
document has more pages than this, you can add pages while the MultiPASS is scanning.

1.

Wait until the last sheet in the ADF starts feeding.

2.

Load up to 20 additional sheets (10 legal size).

■

Insert the first new sheet so that it overlaps the last sheet by about one inch (2.5 cm).

n

Wait until all pages of your document have been scanned completely before starting a new job.

1" (2.5 cm)

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Reviews:

No comments