Canon MultiPASS C530 User Manual Download Page 216

Page: 216 / 383

Canceling Automatic Redialing

You cannot cancel automatic redialing with the

Stop

button while the unit is waiting to redial.

To cancel automatic redialing, do the following:

Wait until the MultiPASS begins redialing.

Press

Stop

■

The MultiPASS asks you to confirm that you want to cancel.

Press

to cancel redialing.

■

Redialing is not canceled until you press

■

If you change your mind and want to continue redialing, press

■

The unit then prints an error report (if set to print one).

Tone

YES=(

)

NO=(#)

CANCEL?

YES

Stop

DIALING

Chapter 5

Sending Faxes

5-21

Summary of Contents for MultiPASS C530
































































































































































































































































































































































































Search results

Summary of Contents for MultiPASS C530

Reviews:

Canon MultiPASS C530, User Manual, Page: 216 / 383

Search results

Summary of Contents for MultiPASS C530

Reviews: