Canon LBP 1760 - B/W Laser Printer User Manual Download Page 94

Page: 94 / 234

The Standard Printing Environment Settings

RESET MENU

Shaded menus appear after an option has been installed. E.g. A5 module with the
Adobe PostScript 3 software or Network cards.

If there is insufficient memory, MEMCONFIG may not appear, even after the A5
module has been installed.

Press Go to take the printer off-line

Press Menu to display the first menu name

RESET MENU/PRINTER clears the memory of most settings and restores the default

values.

PRINTER

Clears memory of all fonts, macro, or page information.

MENU

Clears memory of all fonts, macro, or page information,

and restores most of the menus to their factory defaults.

RESET MENU

RESET=PRINTER

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews:

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 94 / 234

Search results

Summary of Contents for LBP 1760 - B/W Laser Printer

Reviews: