manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, User Manual, Page: 44 / 234

Share
Download
Canon LBP 1760 - B/W Laser Printer User Manual Download Page 44

36

Printing from the Multi-Purpose Tray

4

Insert the paper stack as far as it will go into the printer, with the print side facing up
and the top of the paper going into the printer first 

q

. Adjust the paper guides to the

size of the paper 

w

.

Paper feed roller

Paper sensor

• Make sure that the leading edge of the paper is inserted all the way into the

tray so that it is below the paper feed roller. The paper sensor for  the  tray
is located to the left of the paper feed roller, when viewed from the front of
the printer. Please note the following points when loading small size paper
in the tray. (If the paper is not loaded correctly, the paper will not be
detected by the printer and a message will appear asking you to load paper
in the tray.)

• Make sure that the paper guides are set correctly.
• Make sure that the paper is loaded correctly and that the leading edge is fully

inserted into the printer.

• Make sure that the paper sensor is resting on top of the paper. (The paper

sensor must rest on top of the paper, not just touch the edge of the paper.)

Acceptable

Paper sensor

Not Acceptable

5

To avoid damaging the  tray, close it when not in use.  Remove and store any remaining
print media.  Slide the extension trays in and close the tray.

Summary of Contents for LBP 1760 - B/W Laser Printer











































































































































































































































Reviews:

No comments